NG 900/9-3 Rear ARB
From The Saab Tech Wiki
Revision as of 00:03, 15 February 2010 by Mbcullen (Talk | contribs) (Created page with '=Overview= Replacing the rear ARB is one of the easiest and most effective methods of improving the handling of the 900 and 9-3. Mounting a thicker rear ARB reduces body roll in …')
Overview
Replacing the rear ARB is one of the easiest and most effective methods of improving the handling of the 900 and 9-3. Mounting a thicker rear ARB reduces body roll in turns, improves stability and traction during acceleration, and reduces understeer. Rollbars of varying thicknesses are available from Genuine Saab.
Double Stacked Stock ARBs
A more inexpensive option is to double up stock rollbars. By using two stock ARBs and four grade 8 3/8" bolts and some 1/2" clamps you can cheaply improve you handling.
Aftermarket ARB
Additional information about selecting the correct rear ARB can be found on the [Trolltuner site]
Installation
When removing the stock ARB the stock bolts will more than likely only come off when they snap due to rust and age.
