Changes

From The Saab Tech Wiki
Jump to: navigation, search

NG 900/9-3 Head Unit Removal

922 bytes added, 07:21, 17 February 2010
Created page with '=Overview= ==Tools Required== * DIN removal tools [[file:Head_Unit_Removal_01.gif|thumbnail|none|]] '''Note: Other objects, such as chopsticks can be substituted for the DIN rem…'
=Overview=
==Tools Required==
* DIN removal tools
[[file:Head_Unit_Removal_01.gif|thumbnail|none|]]

'''Note: Other objects, such as chopsticks can be substituted for the DIN removal tools. Additional care should be used when utilizing other objects in place of DIN tools.'''

=Removal=

# Insert the DIN removal tools into the holes either side of the unit until you feel a 'click'
[[file:Head_Unit_Removal_02.jpg|thumbnail|none|DIN Tools in Place]]
# Grasp the the two tools, one in each hand, and push outwards on them.
[[file:Head_Unit_Removal_03.jpg|thumbnail|none|Push DIN Tools Outward]]
# Keep the outward pressure and at the same time pull on the two tools until the unit slides out.
# Unplug the connector blocks, ariel lead and CD cable from the rear and remove the unit from the dashboard.

=Replacement=

# Reconnect the connectors (they are colour coded) ariel lead and CD lead and slide the unit fully home.
Bureaucrat, administrator
847
edits